imported>WOSlinker: wiki-file-name for image

2021-11-22T14:15:50Z

wiki-file-name for image

New page

{{Documentation subpage}}
{{Auto short description}}


This template is used in articles about engines, including, but not limited to automobile and industrial engines.

==Usage==
* See the [[#Parameters|Parameters]] section of this document for '''basic''' explanations of what data to enter in each parameter.
* See [[Wikipedia:WikiProject Automobiles/Conventions#Infoboxes|WikiProject Automobiles/Conventions]] for '''detailed''' explanations of what data to enter in certain parameters and instructions on how to correctly format the data.
* When entering more than one data point per parameter, use the [[Template:Unbulleted list|unbulleted list template]] <nowiki>{{ubl | fact one | fact two | et cetera }}</nowiki> to put each entry on a separate line. Do not use <nowiki> </nowiki> to create line breaks in the infobox.
* In the infobox templates below, [[WP:AUN|conversion templates]] have been provided for your convenience. After copying the infobox template into the article, enter the data, replacing "NNNN" with numeric entries. When entering data into the conversion template, enter digits without thousands separators; i.e. 4287 '''not''' 4,287.

{{Parameter names example|name|image|image_size|alt|upright|interiorimage|caption|manufacturer|designer|aka|production|configuration|displacement|bore|stroke|block|head|valvetrain|timing|compression|operating principle|supercharger|turbocharger|fuelsystem|management|fueltype|oilsystem|coolingsystem|idle|redline|power|specpower|torque|length|width|height|diameter|weight|emissions level|emissions control|predecessor|successor|}}
<pre style="overflow: auto;">
{{Infobox engine
| name =
| image =
| caption =
| manufacturer =
| aka =
| production =
| predecessor =
| successor =
| configuration =
| displacement =
| bore =
| stroke =
| block =
| head =
| valvetrain =
| timing =
| compression =
| operating principle =
| supercharger =
| turbocharger =
| turboboostpressure =
| fuelsystem =
| management =
| fueltype =
| oilsystem =
| coolingsystem =
| idle =
| redline =
| power =
| specpower =
| torque =
| length =
| width =
| height =
| diameter =
| weight =
| emissions level =
| emissions control =
}}
</pre>

==Parameters==
;name: Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine) Examples: M104 or EcoBoost or N53 or Atlas
;image: Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle See [[Wikipedia:WikiProject Automobiles/Conventions#Images|WikiProject Automobiles/Images]]
;manufacturer: Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
;designer: Person responsible for the development of the engine (this should be one or more natural persons)
;aka: Other common or popular names used by the public or by the manufacturer in marketing materials Examples: Cobra-Jet or Hemi
;production: [[Calendar year]] range when the engine was produced, not the [[model year]] Months are recommended if available, but exact dates are discouraged. Examples: {{Start date|1901}}-{{End date|1902}} '''or''' {{Start date|1901|01}}-{{End date|1902|02}} but '''not''' {{Start date|1901|01|31}}-{{End date|1902|02|28}}. Use <nowiki>{{Start date|yyyy}}-{{End date|yyyy}}</nowiki> '''or''' <nowiki>{{Start date|yyyy|mm}}-{{End date|yyyy|mm}}</nowiki> where yyyy is the year and mm is the numeric month.
;predecessor: Name of older or previous engine that was replaced by the engine listed in the '''Name''' field of the infobox Leave blank if this does not apply.
;successor: Name of newer or next engine that replaced the engine listed in the '''Name''' field of the infobox Leave blank if this does not apply.
;configuration: Arrangement and number of cylinders or rotors Examples: Straight-6, Flat-4, V8 or W12. See [[Engine configuration]].
;displacement: [[Engine displacement]] in litres '''or''' cubic centimeters may be used where appropriate Use <nowiki>{{convert|x.x|L|cuin|abbr=on}}</nowiki> where x.x is the displacement in liters or <nowiki>{{convert|xxxx|cc|cuin|abbr=on}}</nowiki> where xxxx is the displacement in cubic centimenters. Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use <nowiki>{{Auto Lrev|xxx}}</nowiki> where xxx is the displacement in cubic inches. See [[Wikipedia:WikiProject Automobiles/Conventions#Displacement|WikiProject Automobiles/Conventions - Displacement]].
;bore: Measurement of the cylinder bore in millimeters Use <nowiki>{{convert|xx.xx|mm|in|abbr=on}}</nowiki> where xx.xx is the bore in millimeters.
;stroke: Measurement of the piston stroke in millimeters Use <nowiki>{{convert|xx.xx|mm|in|abbr=on}}</nowiki> where xx.xx is the stroke in millimeters.
;block: Material used to construct the [[Cylinder block|engine block]] Examples: cast iron or aluminum
;head: Material used to construct the [[Cylinder head]] Examples: cast iron or aluminum
;valvetrain: Description of the [[valvetrain]] Examples: DOHC, OHC or OHV
;timing: Timing drive system Example: belt, wet belt, chain, cambelt
;compression: Engine compression ratio Example: 10:1
;operating principle: Engine operating principle Examples: Diesel, Wankel
;supercharger: Manufacturer, model and type of superchager if known, otherwise type of supercharger Example of manufacturer, model and type: <nowiki>[[Eaton Corporation|Eaton]]</nowiki> R410 TVS roots type Examples of types: Roots, Lysholm screw, Sliding vane or Scroll Leave blank if this does not apply.
;turbocharger: Number of turbochargers (single, dual, quad, etc.) and manufacturer and model if known, otherwise number of turbochargers Example: Single <nowiki>[[IHI Corporation|IHI]]</nowiki> VF48 or Twin <nowiki>[[Honeywell]]</nowiki> GT15 or Quad <nowiki>[[IHI Corporation|IHI]]</nowiki> VN65 Leave blank if this does not apply.
;fuelsystem: Fuel delivery system Examples: carburetor, fuel injection If carburetted, state make and model of carburetor if known. Examples: <nowiki>[[Solex]]</nowiki> 34 or <nowiki>[[Weber carburettor|Weber]]</nowiki> 45 If fuel injected state make, model and characteristics of fuel injection system if known. Example: <nowiki>[[Robert Bosch GmbH|Bosch]]</nowiki> <nowiki>[[Jetronic#KE-Jetronic (1985–1993)|KE-Jetronic]]</nowiki> electronically-controlled, mechanical fuel injection
;management: Type of engine management system Examples: Bosch Motronic, Digifant
;fueltype: Fuel used to cause combustion or movement of the pistons Examples: gasoline, diesel, steam etc.
;oilsystem: Type of oil system Examples: wet sump, dry sump, etc.
;coolingsystem: Type of cooling system Examples: air-cooled, water-cooled, oil-cooled, etc.
;idle: Governed idle rpm i.e. the speed engine rotates under no load under minimal throttle to sustain engine functions.
;redline: Redline i.e. the maximal speed engine is designed to be operated continuously at full throttle under load. Not to be confused with high idle and maximal governed RPM.
;power: Engine power For engines used in '''U.S.''' home market cars use <nowiki>{{convert|xxx|hp|kW|abbr=on}}</nowiki> where xxx is the power in horsepower (hp). For engines used in '''Japanese''' home market cars use <nowiki>{{convert|xxx|PS|kW hp|abbr=on}}</nowiki> where xxx is power in metric horsepower (PS). For engines used in '''British''' home market cars use <nowiki>{{convert|xxx|bhp|kW PS|abbr=on}}</nowiki> where xxx is power in brake horsepower (bhp). For engines used in '''rest-of-world''' home market cars use <nowiki>{{convert|xxx|kW|hp|abbr=on}}</nowiki> where xxx is power in kilowatts (kW). See [[Wikipedia:WikiProject Automobiles/Conventions#Power|WikiProject Automobiles/Conventions - Power]].
;specpower: Specific power
;torque: Peak torque at a specified revolutions per minute (rpm) For engines used in '''U.S.''' home market cars use <nowiki>{{convert|xxx|ft.lbf|Nm|abbr=on}}</nowiki> at yyyy rpm where xxx is the torque in foot-pounds and yyyy is the rpm. For engines used in '''rest-of-world''' home market cars use <nowiki>{{convert|xxx|Nm|ft.lbf|abbr=on}}</nowiki> at yyyy rpm. where xxx is the torque in Newton meters and yyyy is the rpm. See [[Wikipedia:WikiProject Automobiles/Conventions#Torque|WikiProject Automobiles/Conventions - Torque]].
;length: Longest dimension of the engine in millimeters Use <nowiki>{{convert|xxxx|mm|in|abbr=on}}</nowiki> where xxxx is the length in millimeters.
;width: Shorter of the two length measurements of the engine in millimeters Use <nowiki>{{convert|xxxx|mm|in|abbr=on}}</nowiki> where xxxx is the width in millimeters.
;height: Maximum height of the engine in millimeters Use <nowiki>{{convert|xxxx|mm|in|abbr=on}}</nowiki> where xxxx is the height in millimeters.
;diameter: Diameter of the engine in millimeters Use <nowiki>{{convert|xxxx|mm|in|abbr=on}}</nowiki> where xxxx is the diameter in millimeters. Leave blank if this does not apply.
;weight: Weight of the engine in kilograms Use <nowiki>{{convert|xxx|kg|lb|abbr=on}}</nowiki> where xxx is the weight in kilograms.
;emissions level: The most stringent emissions standard(s) the engine is tested to satisfy If an engine has been certified multiple times, list the lowest and highest standard unless intermediate standards marked an important development step. For engines used in '''U.S.''' home market cars use [[United States emission standards]]. For engines used in '''EU''' common market cars use [[European emission standards]]. For engines used in '''rest-of-world''' home market cars use the locally applicable standard.
;emissions control: Technology employed to control emissions below target level Examples: <nowiki>[[Secondary air injection|Air Injection]]</nowiki> or <nowiki>[[Exhaust gas recirculation|EGR]]</nowiki> or <nowiki>[[Catalytic converter]]</nowiki>.

==Example==
;Note: The data below may not reflect the actual specifications of the engine used for this example.

{{Infobox automobile engine
| name = BMW S65B40O0
| image = BMW S65 Engine.JPG
| manufacturer = [[BMW|Bayerische Motoren Werke AG (BMW)]]
| aka = Monster
| production = 2007–2013
| predecessor = [[BMW M54#S54B32|BMW S54]]
| successor = BMW S88
| configuration = 90° [[V8 engine|V8]]
| displacement = {{convert|3999|cc|L cuin|1|order=flip|abbr=on}}
| bore = {{convert|92|mm|in|3|abbr=on}}
| stroke = {{convert|75.2|mm|in|3|abbr=on}}
| block = [[Aluminum]]–[[silicon]] [[alloy]]
| head = Aluminum alloy
| valvetrain = [[DOHC]]
| timing = Chain
| compression = 12.0:1
| supercharger =
| turbocharger =
| fuelsystem = [[Fuel injection]]
| management = MSS60 [[Engine control unit|ECU]]
| fueltype = [[Gasoline]]
| oilsystem =
| coolingsystem = [[Water cooling#Automotive usage|Water-cooled]]
| power = {{convert|309|kW|0}}
| specpower =
| torque = {{convert|400|N.m|lb.ft|0|abbr=on}}
| length = {{convert|734|mm|in|abbr=on}}
| width = {{convert|505|mm|in|abbr=on}}
| height = {{convert|611|mm|in|abbr=on}}
| diameter =
| weight = {{convert|147|kg|lb|abbr=on}}
}}

<pre style="overflow: auto">
{{Infobox automobile engine
| name = BMW S65B40O0
| image = BMW S65 Engine.JPG
| manufacturer = [[BMW|Bayerische Motoren Werke AG (BMW)]]
| aka = Monster
| production = 2007–2013
| predecessor = [[BMW M54#S54B32|BMW S54]]
| successor = BMW S88
| configuration = 90° [[V8 engine|V8]]
| displacement = {{convert|3999|cc|L|1|order=flip|abbr=on}}
| bore = 92 mm
| stroke = 75.2 mm
| block = [[Aluminum]]–[[silicon]] [[alloy]]
| head = Aluminum alloy
| valvetrain = [[DOHC]]
| timing = Chain
| compression = 12.0:1
| supercharger =
| turbocharger =
| fuelsystem = [[Fuel injection]]
| management = MSS60 [[Engine control unit|ECU]]
| fueltype = [[Gasoline]]
| oilsystem =
| coolingsystem = [[Water-cooled]]
| power = {{convert|309|kW|0}}
| specpower =
| torque = {{convert|400|N.m|lb.ft|0|abbr=on}}
| length = {{convert|734|mm|in|abbr=on}}
| width = {{convert|505|mm|in|abbr=on}}
| height = {{convert|611|mm|in|abbr=on}}
| diameter =
| weight = {{convert|147|kg|lb|abbr=on}}
}}
</pre>

==TemplateData==
{{TemplateData header}}
<templatedata>
{
"description": "This template is used in articles about engines, including, but not limited to automobile and industrial engines.",
"params": {
"name": {
"label": "Name",
"description": "Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine)",
"type": "line",
"required": true
},
"image": {
"label": "Image",
"description": "Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle",
"type": "wiki-file-name"
},
"image_size": {
"label": "Image Size",
"type": "string"
},
"alt": {
"label": "Alt Text for Image",
"description": "Alt text for people who cannot see the image.",
"type": "string"
},
"upright": {},
"interiorimage": {},
"caption": {
"label": "Caption",
"description": "The caption field describes the engine pictured in the Image field above.",
"type": "string"
},
"manufacturer": {
"label": "Manufacturer",
"type": "string",
"description": "Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)",
"suggested": true
},
"aka": {
"label": "aka",
"type": "string",
"description": "Other common or popular names used by the public or by the manufacturer in marketing materials"
},
"production": {
"label": "Production",
"description": "Calendar year range when the engine was produced, not the model year. Months are recommended if available, but exact dates are discouraged. Use {{Start date|yyyy}}-{{End date|yyyy}} or {{Start date|yyyy|mm}}-{{End date|yyyy|mm}} where yyyy is the year and mm is the numeric month.",
"example": "{{start date|1901}}-{{end date|1902}} or {{start date|1901|01}}-{{end date|1902|02}}"
},
"designer": {
"label": "Designer",
"description": "Person responsible for the development of the engine (this should be one or more natural persons)"
},
"configuration": {
"label": "Configuration",
"description": "Arrangement and number of cylinders or rotors",
"example": "Straight-6, Flat-4, V8 or W12",
"type": "string"
},
"displacement": {
"label": "Displacement",
"description": "Engine displacement in litres or cubic centimeters may be used where appropriate. Use {{convert|x.x|L|cuin|abbr=on}} where x.x is the displacement in liters or {{convert|xxxx|cc|cuin|abbr=on}} where xxxx is the displacement in cubic centimenters. Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use {{Auto Lrev|xxx}} where xxx is the displacement in cubic inches."
},
"bore": {
"label": "Bore",
"description": "Measurement of the cylinder bore in millimeters. Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the bore in millimeters."
},
"stroke": {
"description": "Measurement of the piston stroke in millimeters. Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the stroke in millimeters."
},
"block": {
"description": "Material used to construct the engine block"
},
"head": {
"description": "Material used to construct the cylinder head."
},
"valvetrain": {},
"compression": {},
"idle": {},
"redline": {},
"operating principle": {
"label": "Operating principle",
"description": "The operating principle is a model that is characteristic of an engine's underlying thermodynamics; it is also known as the engine cycle. Typically, an operating principle has certain qualities that describe it, such as type of combustion (e. g. internal or external), type of ignition (e. g. compression ignition or spark ignition), and type of flame (e. g. premixed or diffusion). In internal combustion engines, common operating principles are, among others, [[Diesel engine|Diesel]], [[Otto cycle|Otto]], [[hot-bulb engine|Akroyd]], and [[Wankel engine|Wankel]]."
},
"supercharger": {},
"turbocharger": {},
"fuelsystem": {},
"management": {},
"fueltype": {},
"oilsystem": {},
"coolingsystem": {},
"power": {},
"specpower": {},
"torque": {},
"length": {},
"width": {},
"height": {},
"diameter": {},
"weight": {},
"emissions level": {},
"emissions control": {},
"predecessor": {},
"successor": {},
"timing": {
"label": "Timing drive system",
"description": "The part that synchronizes the rotation of the crankshaft and the camshaft(s)",
"example": "Belt, Wet belt, Chain, Gears",
"type": "string"
}
},
"format": "block",
"paramOrder": [
"name",
"image",
"image_size",
"alt",
"upright",
"interiorimage",
"caption",
"manufacturer",
"designer",
"aka",
"production",
"configuration",
"displacement",
"bore",
"stroke",
"block",
"head",
"valvetrain",
"timing",
"compression",
"idle",
"redline",
"operating principle",
"supercharger",
"turbocharger",
"fuelsystem",
"management",
"fueltype",
"oilsystem",
"coolingsystem",
"power",
"specpower",
"torque",
"length",
"width",
"height",
"diameter",
"weight",
"emissions level",
"emissions control",
"predecessor",
"successor"
]
}
</templatedata>

<includeonly>{{Sandbox other||

[[Category:Automotive infobox templates|Engine]]
}}</includeonly>

Template:Infobox engine/doc - Revision history

imported>WOSlinker: wiki-file-name for image